How to install the plate hammers of the impact crusher:

The hammer plate is the main working component of a counter-impact crusher. There are numerous sizes and models of hammer plates, and they are generally made of high-chromium alloy. The hammer plate is also one of the key wear-prone parts of the counter-impact crusher, and its service life is closely related to the production capacity of the crusher. Therefore, it is necessary to master the replacement method of the hammer plate. So, how to replace the hammer plate of a counter-impact crusher? Below, we will explain the replacement steps of the hammer plate in detail:

1. Removal of the hammer: First, use the dedicated cover device to open the rear upper frame to facilitate the subsequent work. Rotate the rotor by hand to move the hammer that needs to be replaced to the maintenance door position. Then, fix the rotor, remove the positioning parts of the hammer, and then remove the compression along the axial direction. Next, push the hammer along the axial direction out from the maintenance door or lift it out from the frame. To facilitate the removal of the hammer, you can gently tap the hammer with a hand hammer.
2. Installation of the hammer: When installing the hammer, simply reverse the above process. By following the correct steps to disassemble the hammer, you can save downtime and thereby enhance the working efficiency of the impact crusher. This will also bring considerable economic benefits to the enterprise.